Mobile menu
MCAD CoDesigner
Learning Hub MCAD CoDesigner MCAD CoDesigner: Onboarding Guide

MCAD CoDesigner: Onboarding Guide

Created: January 30, 2025
Updated: August 4, 2026
At a Glance
Learn how to activate your Altium 365 Workspace, install and configure CoDesigner, and get started with MCAD CoDesigner. This onboarding guide provides links to documentation, best practices, additional resources, and help.
Go Deeper with AI:
ChatGPT Perplexity Claude Google Grok
MCAD CoDesigner screenshot

Synchronize your design between Altium Designer and the most popular MCAD systems. ECAD-MCAD integration accelerates multi-disciplinary electronic product design with seamless collaboration between mechanical and electrical engineers.

Getting Started with CoDesigner

Onboarding ObjectiveResource
Activate your Altium 365 Workspace 📄Documentation Article
Install CoDesigner 📥Webpage: Altium Downloads 
Configure CoDesigner 📄Documentation Article
Introduction to CoDesigner for MCAD

 🪢Getting Started Guide: SOLIDWORKS

 🪢Getting Started Guide: PTC Creo

 🪢Getting Started Guide: Fusion

 🪢Getting Started Guide: Inventor

 🪢Getting Started Guide: Siemens NX

How to initialize collaboration 🪢Getting Started Guide
Sync changes across ECAD-MCAD 🪢Getting Started Guide

Best Practices for CoDesigner

  • For newly designed boards, start by sending a blank board from Altium Designer to your MCAD tool to ensure that any future changes can be pulled from MCAD.
  • In order to keep the mechanical dimensions and constraints alive, only make changes to the board shape in your MCAD application.
  • Configure the naming of the Component Models and Component Linkages in the MCAD CoDesigner Section of your Altium 365 Workspace Settings.
  • Review these recommendations for a Mechanical Engineer.

Additional Resources & Help

Mechanical Codesign Solutions MCAD CoDesigner Onboarding Guide Installing and Configuring MCAD CoDesigner

Related Resources

The Power of Accuracy with Team Ribbot Collaborative Engineering: The Power of Accuracy with Team Ribbot Through the story of Team Ribbot, a combat robot built for the BattleBots Pro League, we see firsthand how even a small mishap in translation can lead to costly redesigns and missed deadlines. By utilizing MCAD CoDesigner for direct synchronization between ECAD and MCAD, teams can maintain data integrity, preserve design intelligence, and eliminate translation errors, ensuring that every millimeter counts. Read Article
Breaking the Serial Loop with Team Ribbot Collaborative Engineering: Breaking the Serial Loop with Team Ribbot This article delves into how Team Ribbot overcame the challenges of merging cross-disciplinary updates by implementing MCAD CoDesigner, which allows engineers to selectively review, accept or reject changes without compromising their design integrity or progress. Read Article
How Team Ribbot Built a 40 kW Robot Collaborative Engineering: How Team Ribbot Built a 40 kW Robot Space is limited, but design complexity keeps growing. Explore how seamless ECAD-MCAD collaboration empowers engineering teams to optimize high-performance designs faster, reduce errors, and accelerate product development. Read Article
1:2:39 From PCB to MCAD - Designing a USB Isolator with Altium & SOLIDWORKS Watch our webinar to revolutionize your design workflow! Discover the power of Altium's MCAD CoDesigner and its compatibility with SOLIDWORKS. Watch Video
MCAD CoDesigner Better Mechanical Integration Seamless Mechanical Integration Using ECAD-MCAD CoDesigner See how MCAD CoDesigner enables enhanced electromechanical design. Easily make quick, native changes, optimize fit checks, improve design visibility & more. Read Article
Efficient Circuit Board Workflows MCAD CoDesign Efficient Circuit Board Workflows Enabled by Altium MCAD CoDesigner Hello engineers! Today, I’m excited to share how Altium MCAD CoDesigner can benefit your workflow when designing printed circuit board assemblies (PCBAs). Get ready to learn how Altium MCAD CoDesigner helps us create custom printed circuit boards (PCBs) to power Ribbot! Adapting to Unpredictable Project Changes with Flexible Design Tools Depending on what industry you work in, design timelines can be extremely short, with only weeks or months to Read Article
Cross-Functional Collaboration MCAD CoDesign Optimizing Cross-Functional Collaboration with Altium MCAD CoDesigner I’m excited to share some of our positive experiences with Altium MCAD CoDesigner, which we use extensively for designing all of the custom printed circuit board solutions in Ribbot. Get ready to learn why Altium MCAD CoDesigner is so important for our success as a team and why we wouldn’t choose any other tool for our custom printed circuit board designs. {"preview_thumbnail":"/sites/default/files/styles/video_embed_wysiwyg_preview/public/video Read Article

Related Technical Documentation

New in CoDesigner New in CoDesigner

Altium's MCAD CoDesigner technology connects the mechanical and electrical design domains, allowing the mechanical and electronic engineers to pass the loaded PCB back and forth between the two domains. In your Altium design software, this is achieved through an extension that loads and extracts board and component data from the PCB editor, the MCAD CoDesigner extension. In the MCAD software the…

 Read Documentation
New in CoDesigner 2.x New in CoDesigner 2.x

Altium's MCAD CoDesigner technology connects the mechanical and electrical design domains, allowing the mechanical and electronic engineers to pass the loaded PCB back and forth between the two domains. In your Altium design software, this is achieved through an extension that loads and extracts board and component data from the PCB editor, the MCAD CoDesigner extension. In the MCAD software the…

 Read Documentation
Synchronizing a Rigid-Flex Board Synchronizing a Rigid-Flex Board

Altium's ECAD PCB editor supports two modes of Rigid-Flex design: the original mode (commonly referred to as Rigid-Flex 1), and the Advanced Rigid-Flex mode (also known as Rigid-Flex 2). From CoDesigner 3.4 onwards, CoDesigner also supports both modes of Rigid-Flex design. Read on to learn more about designing a Rigid-Flex PCB in ECAD. This CoDesigner rigid-flex synchronization functionality…

 Read Documentation
Linking ECAD and MCAD Design Components Linking ECAD and MCAD Design Components

This CoDesigner component linking functionality requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then…

 Read Documentation
Altium MCAD CoDesigner Altium MCAD CoDesigner

Bridging the ECAD-MCAD Divide The electronic product you hold in your hand is the melding of numerous, independent designs. Firstly there's the enclosure you're holding; inside that, there will be one or more electronic circuit boards, and on the board, there is often a microprocessor running software. Beyond that, there can be specialized sections of circuitry to perform unusual sensing or…

 Read Documentation
Direct ECAD-MCAD Design with CoDesigner Direct ECAD-MCAD Design with CoDesigner

Use of this CoDesigner documentation requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then check for…

 Read Documentation
ECAD-MCAD Video Tutorials ECAD-MCAD Video Tutorials

Altium CoDesigner brings the electronic and mechanical design worlds together. With this comes the challenge of defining design object and spatial requirements in different design domains, and different design languages. This series of videos will help in the process of understanding how best to transfer your design between the mechanical and electronic design domains. The videos on this page…

 Read Documentation
Installing & Configuring CoDesigner Installing & Configuring CoDesigner

Supported MCAD Software The following MCAD platforms and versions are currently supported: Autodesk Inventor Professional® Autodesk Fusion® (Microsoft Windows version only. Autodesk Fusion Personal license only supported by Altium CircuitMaker) Dassault Systemes SOLIDWORKS® (Standard, Pro & Premium) PTC Creo Parametric® Siemens® NX™ - (for designers with an Altium Enterprise Solution) For details…

 Read Documentation
Preparing Autodesk Fusion for CoDesign Preparing Autodesk Fusion for CoDesign

Altium CoDesigner is an interface for transferring printed circuit board designs between the ECAD and MCAD design domains. Once the CoDesigner add-in has been added to your MCAD software, CoDesigner can pass design changes back and forth. Design changes are passed through an Altium Workspace, which acts as a bridge between the ECAD and MCAD domains. ► Check the version compatibility between your…

 Read Documentation
Preparing Autodesk Inventor for CoDesign Preparing Autodesk Inventor for CoDesign

Altium CoDesigner is an interface for transferring printed circuit board designs between the ECAD and MCAD design domains. Once the CoDesigner add-in has been added to your MCAD software, CoDesigner can pass design changes back and forth. Design changes are passed through an Altium Workspace, which acts as a bridge between the ECAD and MCAD domains. ► Check the version compatibility between your…

 Read Documentation
Back to Home
Thank you, you are now subscribed to updates.