Mobile menu
Altium Designer
Learning Hub Altium Designer PCB Design Rules Visualization - Features

PCB Design Rules Visualization - Features

Created: February 24, 2017
Updated: March 16, 2020
Go Deeper with AI:
ChatGPT Perplexity Claude Gemini Grok
Explore Altium Solutions Explore Altium Designer Altium Designer Quickstart Guide Altium Designer Documentation

Related Resources

Altium Designer Getting Started User Guide Level Up Your Design Skills - Altium Designer Getting Started User Guide We are happy to announce the release of the new Altium Designer Getting Started User Guide. Whether you are new to Altium Designer or you want to brush up on some topics, the Altium Designer Getting Started User Guide will take you from a beginner to a master in PCB design. This is only the beginning! This guide will be updated with new information based on user feedback. Let’s first go over the contents of the guide. Read Article
What is a Schematic Netlist for Your PCB? What is a Schematic Netlist for Your PCB? If you’ve created your next great schematic, there is a lot going on behind the scenes in your design software. The connectivity between components in your schematic can be reduced to a small number of logical and electrical identifiers. The schematic may provide a graphical picture showing connections between different components and pins, but to really understand everything about your design, you’ll need an important document. A schematic Read Article
ad18 mod26 ad18 mod26 Watch Video
Introduction To Rigid Flex PCB Designs - How-To: ADSCvid Introduction To Rigid Flex PCB Designs - How-To: ADSCvid Watch Video
How To Define A Layer Stackup For Rigid Flex - How-To: ADSCvid How To Define A Layer Stackup For Rigid Flex - How-To: ADSCvid Watch Video
ad18 mod27 ad18 mod27 Watch Video
13:35 ad18 mod20 Watch Video
6:01 ad18 mod18 Watch Video
How To Define The Rigid & Flex Regions of your Board - How-To: ADSCvid How To Define The Rigid & Flex Regions of your Board - How-To: ADSCvid Watch Video
ad18 mod23 ad18 mod23 Watch Video

Related Technical Documentation

Configuring Sign-in Authentication Configuring Sign-in Authentication

The Company Dashboard Authentication page allows Company Account Administrators to configure and enable Single Sign-On (SSO) capabilities for your Company Account and includes support for SCIM (System for Cross-domain Identity Management) user and group provisioning, which automates the exchange of identity data between your company and its Identity Provider (IdP). This backend configuration…

 Read Documentation
Moving to CoDesigner from SOLIDWORKS PCB Connector - FAQs Moving to CoDesigner from SOLIDWORKS PCB Connector - FAQs

What do SOLIDWORKS PCB and SOLIDWORKS PCB Connector end-of-life mean? Starting August 15, 2023, SOLIDWORKS PCB and SOLIDWORKS PCB Connector will no longer receive updates or support. Will SOLIDWORKS PCB or SOLIDWORKS PCB Connector still be supported? SOLIDWORKS PCB and SOLIDWORKS PCB Connector will be supported through August 14, 2023. Will I need to export all the files from the solutions before…

 Read Documentation
ECAD-MCAD Video Tutorials ECAD-MCAD Video Tutorials

Altium CoDesigner brings the electronic and mechanical design worlds together. With this comes the challenge of defining design object and spatial requirements in different design domains, and different design languages. This series of videos will help in the process of understanding how best to transfer your design between the mechanical and electronic design domains. The videos on this page…

 Read Documentation
Understanding Harness Synchronization – Advanced Users Understanding Harness Synchronization – Advanced Users

How MCAD CoDesigner supports Harness Design MCAD CoDesigner’s Harness support integrates the ECAD and MCAD models of the harness. The goal is to allow the harness geometry to be designed in MCAD and then transferred back to ECAD, as the physical parameters (lengths) of the harness elements. The common (and essentially similar) element between the ECAD and MCAD environments is that the schematic…

 Read Documentation
Synchronizing a Harness Design Project Synchronizing a Harness Design Project

Accessing the ECAD-MCAD Harness Synchronization Capabilities Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. Harness synchronization is currently available for PTC Creo (MCAD CoDesigner 3.5 and later) and SOLIDWORKS (MCAD CoDesigner 3.6 and later), support for…

 Read Documentation
Synchronizing a Multi-board Assembly Synchronizing a Multi-board Assembly

Multi-board Assembly synchronization requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then check for…

 Read Documentation
Synchronizing a Rigid-Flex Board Synchronizing a Rigid-Flex Board

Altium's ECAD PCB editor supports two modes of Rigid-Flex design: the original mode (commonly referred to as Rigid-Flex 1), and the Advanced Rigid-Flex mode (also known as Rigid-Flex 2). From CoDesigner 3.4 onwards, CoDesigner also supports both modes of Rigid-Flex design. Read on to learn more about designing a Rigid-Flex PCB in ECAD. This CoDesigner rigid-flex synchronization functionality…

 Read Documentation
Linking ECAD and MCAD Design Components Linking ECAD and MCAD Design Components

This CoDesigner component linking functionality requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then…

 Read Documentation
Direct ECAD-MCAD Design with CoDesigner Direct ECAD-MCAD Design with CoDesigner

Use of this CoDesigner documentation requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then check for…

 Read Documentation
Preparing Onshape for CoDesign Preparing Onshape for CoDesign

Altium CoDesigner is an interface for transferring printed circuit board designs between the ECAD and MCAD design domains. Design changes are passed through an Altium Workspace, which acts as a bridge between the ECAD and MCAD domains. Altium MCAD CoDesigner works with Onshape, a fully cloud-native computer-aided design (CAD) and product data management (PDM) platform. To CoDesign between Altium…

 Read Documentation
Back to Home
Altium logo

Solutions for Every Role and Team

  • Discover and evaluate design options earlier
  • Develop in one shared workspace
  • Scale with control and compliance
  • Connect every stage of hardware development

Learn More
Thank you, you are now subscribed to updates.