Altium Designer 18 新功能汇总

This page provides an in-depth look at the ActiveRoute Guided Interactive Router - a key tool when routing your PCB that enables you to quickly produce high-quality results, that meet the design rules, all the while under your full control

Explore Altium Designer 24 technical documentation for Interactive Multi-Routing and related features.

Explore Altium Designer 24 technical documentation for Component Placement and Routing the Board and related features.

Explore Altium Designer 24 technical documentation for Fanout & Escape Routes and related features.

Explore Altium Designer 24 technical documentation for Strategies for Selecting the Routing and related features.

This page looks at the Glossing and Retrace features in the PCB Editor. Where Glossing attempts to shorten the overall route length and reduce the number of corners, Retrace re-applies the preferred width and clearance requirements to an existing route

This page looks at the PCB Editor's support for length tuning - being able to match the lengths of routes, by inserting variable amplitude tuning patterns, to ensure that timing-critical signals arrive at their target pins at the same time

This page looks at the PCB Editor's support for differential pair routing - a design technique employed to create a balanced transmission system able to carry differential (equal and opposite) signals across a printed circuit board

This page looks at the PCB Editor's support for controlled impedance routing - configuring the routing widths and clearances, as well as the material properties and dimensions, to deliver the required routing impedance(s)

Explore Altium Designer 24 technical documentation for Quick Routing Tools and related features.