PCB设计 | PCB设计资源

The High-Speed PCB Stackup Design Challenge 12 min Blog

Stackups for high-speed PCBs can be designed many ways, but these systems must be built by balancing engineering constraints in a final product.

Stepped Impedance Transformer for Complex Loads 10 min Blog

This article will show how a complex load can be converted to a real load with an impedance transformer for any line length and impedance.

PCB Design Guidelines for Using TVS Diode for Transient Protection 12 min Guide Books PCB 设计工程师

PCB 设计工程师

A TVS diode can help with your PCB layout withstand an ESD event by diverting surges away from protected components.

Reflectionless Matching vs. Conjugate Matching: An Apparent Contradiction 7 min Blog

Are reflectionless matching and conjugate matching contradictory? When we look at the formulation for power waves and S-parameters, we see where these are different.

Quarter-Wave Transformer Design For Real and Reactive Loads 10 min Blog PCB 设计工程师

PCB 设计工程师

电气工程师

All quarter-wavelength transformers can be used for real loads, but some can be used for reactive loads with an additional transmission line section.

RF Signal Chain and Link Budget Basics 15 min Blog

Learn about link budget in RF design and use our link budget calculator to evaluate your RF signal chain.

DIY Differential Oscilloscope Probe Project 16 min Blog

Do you need a differential probe for your oscilloscope? Join Mark Harris designing a DIY differential probe, and exploring the advantages of using a differential probe for testing your circuit.

PCB Design

Product Design